brake sensor AUDI TT 1996 8N / 1.G AEB ATW Engines Cylinder Head Remove And Install Workshop Manual

15-12


Note:
For vehicles with automatic transmission, remove vacuum hose -2- from
behind vacuum booster. - Disconnect Accelerator Pedal (AP) cable from throttle valve control
module -J338- and mounting flange (arrows) without removing
positioning clip.
- Remove air guide hose -6- at throttle valve control module.
- Remove vacuum hose -1-.
- Disconnect vacuum line -3- to Evaporative Emissions (EVAP) canister.
- Disconnect vacuum hose -2- at brake servo.
- Disconnect the following harness connectors:
4 - For Intake Air Temperature (IAT) sensor -G42-
5 - For throttle valve control module -J338-

- Disconnect harness connector from Camshaft Position (CMP) sensor -
G40- (arrow).
Pa
ge 11 of 35 C
ylinder head, removin
g and installin
g
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE02.15.2